Track My Order
1-800-494-3933
Need Help? Click to Call
1-800-494-3933 
1-800-494-3933
Need Help? Click to Call
1-800-494-3933 
1-800-494-3933
Track My Order
1-800-494-3933
Home >  Sleeves / Sockets

Sleeves / Sockets

Sleeves and Sockets for recreational and competitive Volleyball.

Filter:
Compare

VB 3.5" and 3" Floating Floor Socket with High Strength Brass Floor Plate

Premium quality, 8" Diameter cast brass hinged floor plate is machined for a high quality fit and finish. (Don't skimp on sleeve quality or you'll find yourself replacing these in a few years) 10" deep Allows floating wooden floors to expand and contr

$214.00 $208.00

Lockable 3.5" and 3" Floating Floor Socket with High Strength Chrome Plated Steel or Brass Floor Plate

Lockable plates prevent dead spots in gym floor during basketball games Chrome-plated cover plate includes slotted locking mechanism Opens with simple turn of the flathead screwdriver or coin Cover plate consists of 7" (18cm) O.D. chrome outer ring a

$289.00 $239.00

5-Inch-SP: 3.5" and 3" Sockets with a 5" O.D. Swivel Plate

3" or 3-1/2" Sleeves are secured with a special swivel hinge to prevent removal or theft. Available in Chrome Plated Steel or Solid Brass The cover plate lies flat on the floor while the equipment is in use. A special cover removal key is provided to

$209.00 $195.00

Extra-Large Float Plate in Chrome Plated Steel

Large 6" I.D. with 8" O.D. Cover plate is lockable with hex key (included) Plate swivels open when in use Chrome plated steel finish 1" clearance suggested between top of floor and sleeve below

$249.00 $212.00
Details  Add to Cart

HS-NEW-C-3.5" and HS-NEW-C- 3" Hard Surface Floor Socket (Concrete, Tile, Carpet, Etc..)

Designed for new construction where you wish to pour concrete right up next to the edge of the sleeve. Our sleeve cap fits flush inside the sleeve for a completely flush installation. Powder coated seamless aluminum construction with welded base ring t

$184.00 $156.00

HS-EC-3.5" and HS-EC- 3" Hard Surface Floor Socket (Concrete, Tile, Carpet, Etc..)

Powder coated seamless aluminum construction with welded base ring to lock sleeve firmly into concrete For use on all non-floating floor systems, including concrete, tile, carpet or synthetic materials Includes aluminum powder coated cap Requires exc

$144.00 $126.00
Details  Add to Cart

PIP 3.5 and 3" Sleeve Hard Surface Economy Floor Socket

Seamless Anodized Aluminum Construction Use on all non-floating floor systems, including concrete, tile or synthetic Powder Coated Aluminum Cap Requires excavation of existing floors Socket is approx. 18" deep Requires two per system Note: Floors

$139.00 $92.50

POP 3.5" and 3" Outdoor Ground Sleeve / Socket (36" Length) (Sand, Grass, Concrete, etc...)

Seamless Anodized Aluminum Construction Suggested for use outdoors in sand, grass, or concrete Powder Coated Aluminum Cap Socket is approx. 36" deep Requires two per system Note: Floors with basements or hollow cavities below require additional re-

$139.00 $92.50

Neoprene Sand Sleeve Cover

Developed for below grade sleeve installs where preventing sand from entering the sleeve is desired. Suggested for use outdoors in areas where sand, dirt, debris can enter the sleeve 12" height allows for easy alignment of Sleeve Cover when sliding po

$69.00 $35.00
Details  Add to Cart

BD-POP-S: Bolt Down POP 3.5 and 3" Sleeve Outdoor Ground Socket (18" Length) (Sand, Grass, Concrete, etc...)

Our Anodized Aluminum lined Bolt-Down POP Sleeve is designed to sit on-top of a submerged concrete footing which is typically 2 foot by 4 foot wide. (This footing may need to be bigger or smaller depending on how hard your existing soil is) 6 stainless

BSBD: Boot Sleeve Bolt Down

Designed for sand volleyball / sand soccer facilities. Allows for a 3-1/2" or 3" volleyball pole to slide into a removable galvanized or stainless steel sleeve held in place with a stainless steel pin. Entire sleeve removes from the base leaving nothi

CFBS: Sand Volleyball Concrete-Free Pole Sleeve

Designed for sand volleyball / sand soccer facilities. Allows for a 3-1/2" or 3" volleyball pole to slide into a removable sleeve held in place with a stainless steel pin. Entire sleeve removes from the base leaving nothing within 18" of the surface o

UV-AGSA: United Volleyball Above Ground Sleeve Adapter

For situations where a larger pole needs to fit inside an existing smaller sleeve or socket. Constructed out of 1/4" Steel or Stainless Steel. The top half of the Reducer is sized to accept your existing volleyball pole while the lower half is machine

UV-PR: United Volleyball Pole Reducer

For situations where a larger pole needs to fit inside an existing smaller sleeve or socket. Constructed out of solid Aluminum, Steel or Stainless Steel. The top half of the Reducer is machined to match your poles inner diameter and the bottom half is

Second Story Volleyball Socket Form

Just what you need to install volleyball sockets in floors with lower level or crawlspace directly below volleyball court Pre-fabricated form can be used as is or field modified Use in conjunction with any of the above indoor sleeves Heavy welded ste

$359.00 $279.00
Details  Add to Cart

VB25FL Flange Thin Slab Drill-In Floor Anchor

Same as VB2.5 except with flange to add additional anchor support when installed on floating maple floor systems Includes all necessary hardware Requires small hole drilled in wood floor and in concrete below. Provides 1/2" threaded hole with spring

$159.00 $139.00
Details  Add to Cart

VB25 Concrete Slab Drill-In Floor Anchor

Heavy Duty Drill-in Floor Anchor to Volleyball systems to the floor. Includes all necessary hardware Requires small hold drilled in floor and concrete below Provides 1/2" threaded hole with spring loaded plug. Detailed installation instructions prov

$139.00 $126.00
Details  Add to Cart

VB25TF Thin Slab Drill-In Floor Anchor

Wide range of thin slab applications Use on athletic floors that have playing surface installed directly over a concrete surface such as tile or synthetic and where the concrete is too thin to allow the use of VB25 or VB25FL Same 1/2" threaded insert

$159.00 $139.00
Details  Add to Cart