6' Volleyball Court Enclosure

6' Volleyball Court Enclosure

SKU:
UPC:
(No reviews yet) Write a Review
$1,630.00
Adding to cart… The item has been added
  • Designed to enclose 50' wide by 80' long sand volleyball courts. (Other sizes can be made very easily)
  • 8' Galvanized steel poles
  • 2 netting panels made with fade resistant netting with a 360 pound breakpoint that measure 7'8" x 49' (The goal is suspending the net tight from pole top to pole top which leaves around a 2" to 4" gap across the ground so the netting panel is not rubbing on the ground in the wind and easily stops a 8" diameter volleyball)
  • 4 netting panels made with fade resistant netting with a 360 pound breakpoint that measure7'8" x 39' (The goal is suspending the net tight from pole top to pole top which leaves around a 2" to 4" gap across the ground so the netting panel is not rubbing on the ground in the wind and easily stops a 8" diameter volleyball)
  • 8 Aluminum powder coated quick connect corner collars with stainless steel set screws (One collar at the top of the corner pole and another near the base) to allow easy connection of kevlar cable or steel cable with no drilling of poles required.
  • 4 Aluminum powder coated quick connect center collars with stainless steel set screws (One colalr at the top of the pole and another near the base) to allow easy connection of the kevlar or steel cables from both sides of the center poles with no drilling of the poles required.
  • 560' of 3,000 pound breakpoint 1/4" Kevlar Cable to attach netting to the poles.  (Also available with steel cables if that material is preferred)
  • 12 Stainless steel micro blocks to tighten the Kevlar Cords.  1 Micro block is used to tighten the top and 1 for the bottom for each of the 6 panels in the netting enclosure.
  • Kevlar Cords are ran through the top and bottom of the perimeter net panels similar to our volleyball nets so if you tighten the top and bottom of the panels the entire panel is very tight and wind resistant.
  • Optional 6' 2" Thick, wrap around vertical velcro pole pads to protect perimeter poles.
  • Sleeves to make poles removable sold separately for $92.50 each